How To Replace a Toilet
How To Replace a Faulty Toilet
If you find you have a leaking toilet, it is best to fix it as soon as possible to avoid further damage. You may wonder how to get your business in Prairie Village, KS, back to normal with minimal impact on your bottom line. Luckily, there are a few steps you can take to easily replace a faulty toilet.
1. Turn Off the Water
Be sure to turn off the water before beginning any work. The shutoff valve is usually located on the floor or wall behind the toilet. Turning this knob in a clockwise direction will stop the flow of water coming into the tank.
2. Soak Up the Water
Before removing the leaking toilet, get rid of the water by flushing and holding down the handle until no more water is passing through the bowl. Use a cup to dip out any water that is pooled in the old toilet and then soak up any remaining water with a sponge.
3. Remove the Old Toilet
Loosen the compression nut attached to the shutoff valve and then disconnect the water supply tube. Remove the caps and nuts from the closet bolts. Once the toilet has been set free, gently rock it back and forth to release any seals and then pull up on the bowl.
4. Install the New Toilet
Insert a new wax gasket over the closet flange. Carefully set the new toilet over the new gaskets while holding onto the seat hinges. Use the closet bolts to help guide the toilet into the right place. Push down on the toilet while tightening the bolts. Your toilet repair will be done once you replace the bolt caps, reattach the supply hose, and turn the water back on.
A leaking toilet can be more than a nuisance. Over time, it can cause water damage that can ruin floors or seep into subfloors, baseboards, or walls. If you have experienced water damage, you can hire a professional water remediation company to disinfect and restore your building to its previous condition.